0.5ml PCR管磁力架
Cat. QYM03
产品描述：
本款磁力架在方便同时处理16个样本，保证两排样本之间的PCR管开盖后不互相干扰。留足手指的操作空间，提升了操作舒适度。同时采用了体积更大的磁铁，磁铁强度，吸附力大幅提高。
启研磁力架用于磁珠法分离样品。磁珠可用于分离细胞，蛋白，核酸，或其他生物样品。首先将磁珠与样品以适当的比例在EP管中混合。数分钟内，磁珠即可与样品中目的分子或细胞结合。之后将EP管置入磁场中，在磁力作用下，与磁珠结合的目的分子或细胞可吸附在管壁上。弃上清，获得被磁珠捕获的目标分子或细胞。经过反复的吸附洗脱等环节，即可实现对目标生物样本的分离纯化。当外加磁场移除后，磁珠即分散，不会残留磁性。启研磁力架可用于任何种类的磁珠分离。
产品特色：
规格：16 孔，可放置 16孔x0.5ml PCR管或离心管。
工作体积：适合 PCR 产物回收使用。
体积小巧，操作简单，可提供较小体积样品的有效磁珠分离。可同时分离 16 管样品。
室温储存。-20℃-70℃之间保持性能稳定。
启研使用的是国内最高标号的磁铁，好磁铁是有标准的。此架子的每块磁铁可提供 2300g 的垂直拉力， 表磁大于 5000gauss。
清洁与消毒：
可用 70%酒精或 1%次氯酸钠消毒。消毒后及时擦干。不可浸泡于沸水或其他腐蚀性液体中。
提示：请勿高压。
保存与稳定性：
磁力架包含强力钕磁铁部件，其磁性可维持终身不会消退。建议保存于凉爽、干燥环境。请勿在超过 70℃（122℉）的环境下使用。
警告：
磁力架包含强磁场，使用时远离钢铁器具。佩戴心脏起搏器或其他医疗磁场装置者请勿使用。
Quayad（启研）Magnetic Separator Rack of 0.5ml PCR tubes
Cat. QYM03
●Holds:0.5ml PCR tubes/centrifuge tubes; 16-well
●Working volume:It is especially suitable for recycling products.
●Small size, simple operation, suitable for effective magnetic bead separation of small volume samples.The Rack can take up to 16 samples at the same time.
●Store at ambient temperature, and temperature range that can be subjected to -20-70°C.
●Magnetic bead suction 2300g; Surface gauss greater than 5000 gs.
Product Description
This Magnetic Separator Rack is convenient for processing 16 samples at the same time, and ensures that the PCR tubes between the two rows of samples do not interfere with each other after opening the lid. Leave enough operating space of fingers, improve the operating comfort. At the same time, a larger magnet is used, and the strength and adsorption force of the magnet are greatly improved.
The Magnetic Separator Rack is used for sample separation by magnetic bead method. The magnetic beads can be used to isolate cells, proteins, nucleic acids or other biomolecules. The magnetic beads are mixed with the sample in the proper ratio in a EP tube, and usually bind to the target biomolecules within a few minutes. The EP tube is placed on the shelf, and the target molecule or cell combined with the magnetic bead can be adsorbed on the tube wall with the magnetic bead under the action of magnetic force. Discard the supernatant and obtain the target molecule or cell captured by the magnetic bead. After repeated adsorption and elution, the target biological samples can be separated and purified.When the magnetic field is removed, the magnetic beads are dispersed and no residual magnetism. These magnets can be used with all types of magnetic beads.
Precautions
These magnets contain very strong permanent magnets. People wearing a pacemaker or any other medical magnetized implant should not use this product unless advised by a health professional; the implant could be affected or damaged by exposure to a strong magnetic field. Keep tools and objects that could be damaged by the magnetic field out of the working area. This includes, but is not restricted to, credit cards and other products containing magnetic recording devices. Keep away from delicate instruments, watches, electronic equipment, displays and monitors. The magnet may attract steel or other magnetic material with high mechanical forces. Take care during handling. Avoid contact between two magnets. Do not pull the magnets apart if contact has been made; twist off to prevent damage to the unit or fingers.
Cleaning and Disinfection
The following materials are recommended for cleaning purposes. Spray and/or wipe the magnetic rack either with 70% alcohol, or 1% sodium hypochlorite solution (bleach). Dry promptly after disinfection. Do not submerge in aqueous solutions and avoid prolonged exposure to water orother organic solvents.
Note: Do not autoclave the magnetic.
Storage and stability
The magnets contain high-energy Neodymium permanent magnets, and the magnetic strength will not diminish significantly during the lifetime of the product. Do not use the magnets above 70°C (122°F) and store in a cool, dry environment. Avoid prolonged exposure of the magnets to direct sunlight or artificial UV light as the surface material may become brittle.
